Thick Film Resistor Networks
Standard Type NT(1/6W)

Features:
◎ Highly Stable Thick Film Products.
◎ Products Protected By Tough Epoxy Conformal Coating.
◎ Reduces Total Assembly Costs.
◎ Wide Resistance Range(1Ω-1MΩ).

Construction:

Standard Constructions:

TYPE A B C
Circuit Construction
TYPE
D
E
F
Circuit Construction
Characteristics
Specifications Test Methods
DC Resistance
JIS-C-5202 5.1
F(±1%)
J(±5%)
Resisance Value Test at Room Temperature 25℃
T.C.R.Temperature Coefficient
JIS-C-5202 5.2
±200PPM/ ℃

 

 

R1:Resistance Value at Room Temperature (T1)
R2:Resistance Value at Room Temperature (T2)

Load Life in Humidity
JIS-C-5202 7.9
Resistance Change Rate is ±(5%+0.05Ω)Max.With no Evidence of Mechanical Damage. Resistance Change After 1000Hrs.(1.5Hrs ON,0.5Hrs OFF) at Rated Voltage in a Humidity Chamber Controlled at 40±2℃ And 90-90% Relative Humidity.。
Load Life
JIS-C-5202 7.10
Resistance Change Rate is ±(5%+0.05Ω)Max.With no Evidence of Mechanical Damage. Resistance Change After 1000Hrs Operating at Rated Voltage With Duty Cycle of 1.5Hrs ON 0.5Hrs OFF at 70±2℃.
Short Time Over LOad
JIS-C-5202 5.5
±(1%+0.05Ω) Resistance Change After The Application of a Potential of 2.5 Time Rated Voltage For 5 Seconds.
Insulation Resistance
1000MΩ Or More V-Block
Resistance to Soldering Heat
JIS-C-5202 6.4
Resistance Change Rate is ±(1%+0.05Ω)Max.With no Evidence of Mechanical Damage. 将电阻两端导线浸入锡炉约3.2到4.8mm依下表规定实施
TEMPERATURE
DIP TIME
350℃±10℃
260℃±5℃
3±0.5℃ SEC
10±1.0℃ SEC
Solderability
JIS-C-5202 6.5
95% Coverage Minimum. Test Temperature of Solder: 230±5℃
Dwell Time in Solder:3±0.5

 Network Resistor: